Digital TF3 has been added to your cart.

Yamaha Audio Mixer

Digital TF3

MFR# TF3 BLK# 034-0413
in-Store Price: 4.179,00€ + VAT
Online Price: 4.011,84€ + VAT
  • Desktop 48-CH Digital Audio Mixer
  • 24x XLR/Jack 6.3mm Combo MIC/Line IN
  • 16x analog XLR OUT? - 2x RCA Stereo Line IN
  • RJ45 Ethernet Connector
Not in stock
On order 15 Business Days

Ample input capacity and hands-on control in a compact console that can handle a wide range of applications.

 

  • 25 motor faders (24 channels + 1 master)
  • 48 input mixing channels (40 mono + 2 stereo + 2 return)
  • 20 Aux (8 mono + 6 stereo) + Stereo + Sub buses
  • 8 DCA groups with Roll-out
  • 24 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
  • 16 analog XLR outputs
  • 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
  • 1 expansion slot for NY64-D audio interface card

Fader Configuration 24 + 1 (Master)
Mixing Capacity Input Channels 48 (40 mono + 2 stereo + 2 return)
Aux Buses 20 (8 mono + 6 stereo)
Stereo Buses 1
Sub Buses 1
Input channel functions 8 DCA Groups
I/O Inputs 24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Outputs 16 (XLR)
Expansion slots 1
USB 34x34 USB Audio Interface, 2-track recording via USB Storage Device
 

General specifications

Sampling frequency rate Internal 48 kHz
Signal delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level Equivalent input noise –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Residual output noise –85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements 100–240 V 50/60 Hz
Power consumption 110 W
Dimensions W 716 mm (28.2in)
H 225 mm (8.9in)
D 599 mm (23.6in)
Net weight 17.0 kg (37.5lb)
Accessories Quick Guide, Power Cord, NUENDO LIVE (DAW Software)
Options Expansion Card, Foot Switch (FC5)
Others Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C
 

Analog input characteristics

Input Terminals GAIN Load
Impedance
For Use With
Nominal
Input Level Connector balanced /
Unbalanced
Sensitivity*1 Nominal Max. before clip
INPUT1-24 +66dB 7.5KΩ 50-600Ω Mics
or 600Ω Lines
-82dBu (61.6V) -62dBu (0.616mV) -42dBu (6.16mV) Combo Jack (XLR-3-31 type *2
or TRS phone *3)
Balanced
-6dB -10dBu (245mV) +10dBu (2.45V) +30dBu (24.5V)
ST IN 1,2 10kΩ 600Ω Lines -30dBV (31.6V) -10dBV (316mV) +10dBV (3.16V) RCA Pin Jack Unbalanced

*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are at maximum position.)
*2. 1: GND, 2: HOT, 3: COLD
*3. Tip: HOT, Ring: COLD, Sleeve: GND
*In these specifications, 0dBu = 0.775Vrms.
*+48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.
 

Analog output characteristics

Output Terminals Source
Impedance
For Use With
Nominal
Output Level Connector balanced /
Unbalanced
Nominal Max. before clip
OMNI OUT 1-16 75Ω 600Ω Lines +4dBu (1.23 V) +24dBu (12.3 V) XLR-3-32 type *1 Balanced
PHONES *3 100Ω 40Ω Phones 3mW 75mW Stereo Phone Jack (TRS) *2 Unbalanced

*1.1: GND,2: HOT, 3: COLD 
*2 Tip: LEFT, Ring: RIGHT, Sleeve: GND 
*3 The position of the level control is lowered by 16dB from the maximum.
*In these specifications, 0dBu = 0.775Vrms. 
*All output DA converters are 24bit, 128times oversampling.

Digital input/output specifications

Terminals Format Data length Audio Connector
USB (TO HOST) USB 24bit 34ch input / 34ch output, PCM USB (B type)
iPad USB Playback: MP3 or WAV file data / Record: WAV file data USB (A type)

Control I/O specifications

Terminals Format Level Connector
NETWORK IEEE802.3 10BASE-T/100Base-TX RJ-45
FOOT SW TS Phone

 

STATUS

Status
New
Availability
15 Business Days
Audio Mixer Type
Desktop Audio Mixer
Digital/Analog
Digital Mixer
No. of Channels
48

GENERAL FEATURES

Phantom Power 48V
Yes
Digital Effects
Yes
No. of Digital Effects
8 Effects + 10 GEQ
Equalizer
Yes
Group outputs
Yes
No. of Group outputs
8 DCA Groups
AUX Outputs
Yes
No. of AUX outputs
20 (8 mono + 6 stereo)
Busses
Yes
No. of Busses
22 (8 mono + 6 stereo + 1 Sub bus + 1 Stereo Bus)
PRE Fader
Yes
Audio Meters
Yes
Peak indicator
Yes
Mount
Desktop
Distortion
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency Response
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Input Noise
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Output Noise
–85 dBu, ST master off (Measured with an A-Weight filter)

MORE SPECIFICATIONS

Extras
34x34 USB Audio Interface, 2-track recording via USB Storage Device.
24+1(master) 100 mm motorized faders.
Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders.
Power
AC 220V
Power Consumption
110 Watt
Country of Origin
Japan
Warranty
1 Year

PHYSICAL

Total Dimensions (WxHxD)
71.6 x 59.9 x 22.5 cm
Total Weight
17 kg
  • Mixer
  • Power Cord
  • Manual
Pdf not available.
Video not available.

product

1508A

MFR#1508A BLACK  BLK#007-0023
in-Store Price: 0,98€ + VAT
Online Price: 0,94€ + VAT
  • Audio Cable
  • For XLR Connectors
  • Diameter: 3.32mm
  • Impedance: 50 Ohm
264pcs in stock
Immediate Shipping