MZ Light
LED884B OLED Basic
MFR# 532-Basic-Kit
BLK# 501-3OBA
Τιμή στο κατάστημα: 672,00€ + ΦΠΑ
Τιμή Web: 645,12€ + ΦΠΑ
- Bicolor LED Light Basic Kit
- Extended CRI: 95 - OLED Screen
- 884 powerful SMD LEDs
- 23500Lux @0.6m
High Quality Video, Cine and Photo lights. Ideal for productions, studios, theaters and any kind of event shootings.
Quality
We use Japanese SMD LED lights with Extended CRI95 or Standard CRI 97.
Extended CRI
Extended CRI light measurement uses 15 color samples for more accurate results. Standard CRI uses only 8 color samples. MZ LED Lights feature Extended CRI95 or Standard CRI97.
Durability
We have used Aluminum material for the best possible cooling of both LED board and Dimmer. Heatsinks are attached to the aluminum bodies and heat is transfered to the enviroment in the best possible way. That's why you can use our LED lights In warmer places with same efficiency. Aluminum material offers extra durability. You can use your MZ LED lights in harsh enviroments.
Powerful and Portable
MZ are very powerful but portable LED lights. Half size and half weight than LED Panels but very powerful with low power consumption. You can fit up to Five MZ LED Lights in a single Bag.
MZ-LED176 LED Light is more powerful than LED500 LED Panels
MZ-LED336 LED Light is more powerful than LED1000 LED Panels
MZ-LED884 LED Light is more powerful than LED2000 LED Panels
Silent use
We don't use fans for cooling our LED lights. So there are no sound interferences when you use your MZ LED lights. In that way you can use them In TV Studios with Sound recordings and wireless Microphones.
Ideal for Studios
With DMX Controller you can Control your MZ LED lights remotely up to 150m away. DMX address of each LED light is set from the DMX menu of the Dimmer. This is an ideal solution for Studios and theaters. For Cost effective solutions, when you use the Standard Dimmer, you can control your MZ LED lights up to 30m away by using cable extention. No extra equipment is required.
Softboxes - Umbrellas - Filters
You can Adapt Softboxes, Barndoors, Umbrellas or filters on your MZ LED lights.
MZ Softboxes are available with or without Grid 60x60cm, 90x90cm, 23x90cm and 30x120cm. Softboxes reduce contrast, conceal skin blemishes, and soften the edges of the shadows. Softboxes with Grids are able to focus the light on their targets and eliminate any spilling light on the background.
Many Polycarbonate Color filters and diffusers are also available with strong magnets that can be adapted easily to the light body. Available filters are: Diffuser, Warm(3200K), Cool(5600K), Red, Brown, Yellow, Dark Green.
Directional metal snoot with grids and color filters is also available. Available color filters: Red, Blue, Green, Orange.
Dimmer is separated from the light body
We wanted to produce portable and powerful LED lights in order to be able to fit three or four pieces in a single bag. LED panels of other manufacturers are big and heavy because the dimmer and the power supplier are usually integrated in the light body. In that way we have produced more powerful but smaller and portable LED lights.
The Dimmer, the LED board and the power supplier emit a lot of heat. So, in LED Panels, where they are all integrated in the light body the heat is increased a lot, which results to reduce of product life . MZ-Lighting separated the Dimmer and the LED Board and integrate them in high quality aluminum bodies with aluminum heatsinks for better cooling and longer product lifespan. Better cooling lets you also use your MZ LED Lights in warmer places with same efficiency.
When you use LED lights on high tripods, you usually want to control them easily without changing their position. In LED Panels of other Manufacturers where the Dimmer is integrated in the Light body, this is not possible. With the MZ LED lights, you can put the Dimmer on the tripod with a Clamp and control your light remotely without changing its position.
When you have a studio and you want to control your MZ LED lights with a cheap and easy way, you can extend the cable between the LED body and the Dimmer and control your MZ LED lights remotely. You can use up to 30m cables by using the 120Watt MZ power supplier.
MZ LED Lights use SMD LEDs without lenses with 115degrees light beam.
LED lights with 115-degree light beam can be used for wide angle lighting. In that way you can use your light closer to your subject.
Usually other LED panel manufacturers use low cost lenses for their led lights in order to have a 60-degree light beam and make the light more powerful in longer distances. These low cost lenses usually produce bad quality lighting with low CRI ratings and no uniformity. On the other hand, when you use SMD LEDs without lenses you get the most from your LEDs for high CRI Ratings and better uniformity of your lighting.
MZ-Lighting produce two high-quality optional lenses for the MZ LED lights. One lens is 60 degrees and the second one is 30 degrees. These lenses are detachable! So you can use three different light beams with your MZ LED lights: 115, 60 or 30 degrees. When you use the 60-degree lens the intensity of the lighting is tripled and when you use the 30-degree lens the intensity of the light is increased by 5-times in longer distances.
Round shaped MZ LED lights vs LED panels.
It is wrongly believed that Round shaped LED lights have narrow light beam (spot light) in comparison to the LED Panels, but this is not always the case. Light beam angle depends on the LEDs that you will use and not from the shape of the Light body. We use Japanese SMD LEDs with a wide light beam of 115 degrees. Usually LED Panels use LEDs with lenses and the light beam is very narrow (spot light), 60 or even 45 degrees, in order to make the light stronger in long distances.
MZ-Lighting produce two high-quality optional lenses for the MZ LED lights. One lens is 60 degrees and the second one is 30 degrees. These lenses are detachable! So you can use three different light beams with your MZ LED lights: 115, 60 or 30 degrees. When you use the 60-degree lens the intensity of the lighting is tripled and when you use the 30-degree lens the intensity of the light is increased by 5-times in longer distances.
Aluminum material
MZ LED Board and Dimmer are integrated in separate Aluminum bodies with aluminum Heatsinks. We have used Aluminum material for the best possible cooling of both LED board and Dimmer. Heatsinks are attached to the aluminum bodies and heat is transfered to the enviroment in the best possible way. That's why you can use our LED lights In warmer places with same efficiency.
We don't use fans for cooling our LED lights. So there are no sound interferences when you use your MZ LED lights. In that way you can use them In TV Studios with Sound recordings and wireless Microphones.
Aluminum is a durable a robust material. You can use your MZ LED lights in harsh enviroments.
Dimmer options:
You have three options of Dimmer for your MZ LED lights.
1. Dimmer with OLED Screen.
- OLED Screen
- Accurate Temperature Control
- Operation Menu
- Boost Function
- 2 Mode Selection
- Operation hours
- Memory Save/Recall
- Effects
2. Dimmer with OLED Screen and DMX Control.
- DMX Control with 3-pin XLR IN/OUT for Loop
- OLED Screen
- Accurate Temperature Control
- Operation Menu
- Boost Function
- 2 Mode Selection
- Operation hours
- Memory Save/Recall
- Effects
- DMX Address
3. Dimmer without OLED Screen.
- Boost Function
- 2 Mode Selection
Battery operated
The MZ LED Lights are battery operated. They have an XLR 4-pin Male DC input 7-17V or 27-35V for the MZ-884.
AC or Battery operated
The advantage of our LED lights is that you can use AC power or different kind of Batteries using the external MZ battery adapters. These adapters can be adapted on Tripods with clamps which gives you extra stability to your light stands. On the other hand, LED panels usually have the Battery adapters integrated on the light body which adds extra weight on the top of the tripod and leads to instability.
MZ-NPF-Single adapter for one Sony NPF type battery. This adapter can be used only for the MZ-LED176 lights with Boost disabled. It is equipped with Tripod Clamp and XLR 4-pin Female Connector.
MZ-NPF-Dual adapter for two Sony NPF type batteries. This adapter is equipped with Tripod Clamp and XLR 4-pin Female Connector. It can be used for both MZ-LED336 and MZ-LED176 LED lights.
MZ-Vlock adapter for one Sony Vlock type Battery. This adapter is equipped with Tripod Clamp, D-Tap output and XLR 4-pin Female Connector. It can be used for both MZ-LED336 and MZ-LED176 LED lights.
MZ-Vlock-Dual-14.8V adapter for two Sony Vlock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 14.8V. It can be used for both MZ-LED336 and MZ-LED176 LED lights for long lasting shootings.
MZ-Vlock-Dual-29.6V adapter for two Sony Vlock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 29.6V. It can be used only for the MZ-LED884 LED lights.
MZ-Glock-Dual-14.8V adapter for two Panasonic Glock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 14.8V. It can be used for both MZ-LED336 and MZ-LED176 LED lights for long lasting shootings.
MZ-Glock-Dual-29.6V adapter for two Panasonic Glock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 29.6V. It can be used only for the MZ-LED884 LED lights.
Power adapters
MZ LED lights can be also powered by AC using our MZ AC-DC Power adapters.
MZ-PSU-60W AC input, 15V/4A DC output. It can be used only for the MZ-LED176 LED Lights.
MZ-PSU-80W AC input, 15V/5.3A DC output. It can be used only for the MZ-LED176 LED Lights.
MZ-PSU-90W AC input, 15V/6A DC output. It can be used for both MZ-LED336 and MZ-LED176 LED Lights.
MZ-PSU-100W AC input, 15V/6.6A DC output. It can be used for both MZ-LED336 and MZ-LED176 LED Lights.
MZ-PSU-120W AC input, 15V/8A DC output. It can be used for both MZ-LED336 and MZ-LED176 LED Lights.
MZ-PSU-240W AC input, 30V/8A DC output. It can be used only for the MZ-LED884 LED Lights.
Quality
We use Japanese SMD LED lights with Extended CRI95 or Standard CRI 97.
Extended CRI
Extended CRI light measurement uses 15 color samples for more accurate results. Standard CRI uses only 8 color samples. MZ LED Lights feature Extended CRI95 or Standard CRI97.
Durability
We have used Aluminum material for the best possible cooling of both LED board and Dimmer. Heatsinks are attached to the aluminum bodies and heat is transfered to the enviroment in the best possible way. That's why you can use our LED lights In warmer places with same efficiency. Aluminum material offers extra durability. You can use your MZ LED lights in harsh enviroments.
Powerful and Portable
MZ are very powerful but portable LED lights. Half size and half weight than LED Panels but very powerful with low power consumption. You can fit up to Five MZ LED Lights in a single Bag.
MZ-LED176 LED Light is more powerful than LED500 LED Panels
MZ-LED336 LED Light is more powerful than LED1000 LED Panels
MZ-LED884 LED Light is more powerful than LED2000 LED Panels
Silent use
We don't use fans for cooling our LED lights. So there are no sound interferences when you use your MZ LED lights. In that way you can use them In TV Studios with Sound recordings and wireless Microphones.
Ideal for Studios
With DMX Controller you can Control your MZ LED lights remotely up to 150m away. DMX address of each LED light is set from the DMX menu of the Dimmer. This is an ideal solution for Studios and theaters. For Cost effective solutions, when you use the Standard Dimmer, you can control your MZ LED lights up to 30m away by using cable extention. No extra equipment is required.
Softboxes - Umbrellas - Filters
You can Adapt Softboxes, Barndoors, Umbrellas or filters on your MZ LED lights.
MZ Softboxes are available with or without Grid 60x60cm, 90x90cm, 23x90cm and 30x120cm. Softboxes reduce contrast, conceal skin blemishes, and soften the edges of the shadows. Softboxes with Grids are able to focus the light on their targets and eliminate any spilling light on the background.
Many Polycarbonate Color filters and diffusers are also available with strong magnets that can be adapted easily to the light body. Available filters are: Diffuser, Warm(3200K), Cool(5600K), Red, Brown, Yellow, Dark Green.
Directional metal snoot with grids and color filters is also available. Available color filters: Red, Blue, Green, Orange.
Dimmer is separated from the light body
We wanted to produce portable and powerful LED lights in order to be able to fit three or four pieces in a single bag. LED panels of other manufacturers are big and heavy because the dimmer and the power supplier are usually integrated in the light body. In that way we have produced more powerful but smaller and portable LED lights.
The Dimmer, the LED board and the power supplier emit a lot of heat. So, in LED Panels, where they are all integrated in the light body the heat is increased a lot, which results to reduce of product life . MZ-Lighting separated the Dimmer and the LED Board and integrate them in high quality aluminum bodies with aluminum heatsinks for better cooling and longer product lifespan. Better cooling lets you also use your MZ LED Lights in warmer places with same efficiency.
When you use LED lights on high tripods, you usually want to control them easily without changing their position. In LED Panels of other Manufacturers where the Dimmer is integrated in the Light body, this is not possible. With the MZ LED lights, you can put the Dimmer on the tripod with a Clamp and control your light remotely without changing its position.
When you have a studio and you want to control your MZ LED lights with a cheap and easy way, you can extend the cable between the LED body and the Dimmer and control your MZ LED lights remotely. You can use up to 30m cables by using the 120Watt MZ power supplier.
MZ LED Lights use SMD LEDs without lenses with 115degrees light beam.
LED lights with 115-degree light beam can be used for wide angle lighting. In that way you can use your light closer to your subject.
Usually other LED panel manufacturers use low cost lenses for their led lights in order to have a 60-degree light beam and make the light more powerful in longer distances. These low cost lenses usually produce bad quality lighting with low CRI ratings and no uniformity. On the other hand, when you use SMD LEDs without lenses you get the most from your LEDs for high CRI Ratings and better uniformity of your lighting.
MZ-Lighting produce two high-quality optional lenses for the MZ LED lights. One lens is 60 degrees and the second one is 30 degrees. These lenses are detachable! So you can use three different light beams with your MZ LED lights: 115, 60 or 30 degrees. When you use the 60-degree lens the intensity of the lighting is tripled and when you use the 30-degree lens the intensity of the light is increased by 5-times in longer distances.
Round shaped MZ LED lights vs LED panels.
It is wrongly believed that Round shaped LED lights have narrow light beam (spot light) in comparison to the LED Panels, but this is not always the case. Light beam angle depends on the LEDs that you will use and not from the shape of the Light body. We use Japanese SMD LEDs with a wide light beam of 115 degrees. Usually LED Panels use LEDs with lenses and the light beam is very narrow (spot light), 60 or even 45 degrees, in order to make the light stronger in long distances.
MZ-Lighting produce two high-quality optional lenses for the MZ LED lights. One lens is 60 degrees and the second one is 30 degrees. These lenses are detachable! So you can use three different light beams with your MZ LED lights: 115, 60 or 30 degrees. When you use the 60-degree lens the intensity of the lighting is tripled and when you use the 30-degree lens the intensity of the light is increased by 5-times in longer distances.
Aluminum material
MZ LED Board and Dimmer are integrated in separate Aluminum bodies with aluminum Heatsinks. We have used Aluminum material for the best possible cooling of both LED board and Dimmer. Heatsinks are attached to the aluminum bodies and heat is transfered to the enviroment in the best possible way. That's why you can use our LED lights In warmer places with same efficiency.
We don't use fans for cooling our LED lights. So there are no sound interferences when you use your MZ LED lights. In that way you can use them In TV Studios with Sound recordings and wireless Microphones.
Aluminum is a durable a robust material. You can use your MZ LED lights in harsh enviroments.
Dimmer options:
You have three options of Dimmer for your MZ LED lights.
1. Dimmer with OLED Screen.
- OLED Screen
- Accurate Temperature Control
- Operation Menu
- Boost Function
- 2 Mode Selection
- Operation hours
- Memory Save/Recall
- Effects
2. Dimmer with OLED Screen and DMX Control.
- DMX Control with 3-pin XLR IN/OUT for Loop
- OLED Screen
- Accurate Temperature Control
- Operation Menu
- Boost Function
- 2 Mode Selection
- Operation hours
- Memory Save/Recall
- Effects
- DMX Address
3. Dimmer without OLED Screen.
- Boost Function
- 2 Mode Selection
Battery operated
The MZ LED Lights are battery operated. They have an XLR 4-pin Male DC input 7-17V or 27-35V for the MZ-884.
AC or Battery operated
The advantage of our LED lights is that you can use AC power or different kind of Batteries using the external MZ battery adapters. These adapters can be adapted on Tripods with clamps which gives you extra stability to your light stands. On the other hand, LED panels usually have the Battery adapters integrated on the light body which adds extra weight on the top of the tripod and leads to instability.
MZ-NPF-Single adapter for one Sony NPF type battery. This adapter can be used only for the MZ-LED176 lights with Boost disabled. It is equipped with Tripod Clamp and XLR 4-pin Female Connector.
MZ-NPF-Dual adapter for two Sony NPF type batteries. This adapter is equipped with Tripod Clamp and XLR 4-pin Female Connector. It can be used for both MZ-LED336 and MZ-LED176 LED lights.
MZ-Vlock adapter for one Sony Vlock type Battery. This adapter is equipped with Tripod Clamp, D-Tap output and XLR 4-pin Female Connector. It can be used for both MZ-LED336 and MZ-LED176 LED lights.
MZ-Vlock-Dual-14.8V adapter for two Sony Vlock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 14.8V. It can be used for both MZ-LED336 and MZ-LED176 LED lights for long lasting shootings.
MZ-Vlock-Dual-29.6V adapter for two Sony Vlock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 29.6V. It can be used only for the MZ-LED884 LED lights.
MZ-Glock-Dual-14.8V adapter for two Panasonic Glock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 14.8V. It can be used for both MZ-LED336 and MZ-LED176 LED lights for long lasting shootings.
MZ-Glock-Dual-29.6V adapter for two Panasonic Glock type Batteries. This adapter is equipped with D-Tap output and XLR 4-pin Female Connector. The output is DC 29.6V. It can be used only for the MZ-LED884 LED lights.
Power adapters
MZ LED lights can be also powered by AC using our MZ AC-DC Power adapters.
MZ-PSU-60W AC input, 15V/4A DC output. It can be used only for the MZ-LED176 LED Lights.
MZ-PSU-80W AC input, 15V/5.3A DC output. It can be used only for the MZ-LED176 LED Lights.
MZ-PSU-90W AC input, 15V/6A DC output. It can be used for both MZ-LED336 and MZ-LED176 LED Lights.
MZ-PSU-100W AC input, 15V/6.6A DC output. It can be used for both MZ-LED336 and MZ-LED176 LED Lights.
MZ-PSU-120W AC input, 15V/8A DC output. It can be used for both MZ-LED336 and MZ-LED176 LED Lights.
MZ-PSU-240W AC input, 30V/8A DC output. It can be used only for the MZ-LED884 LED Lights.
STATUS
- Status
- New
- Availability
- 25 Business Days
- Light Type
-
Round LED Light
GENERAL FEATURES
- Light Power (equivalent)
-
1500Watt
- No. of LEDs
-
884
- Max Luminus Flux in Lumens
-
24.700Lum
- Max Luminus Intensity in LUX
-
23500lux @60cm (or 47000lux @60cm with optional lens)
8500lux @1m (or 17000lux @1m with optional lens)
950lux @3m (or 1900lux @3m with optional lens)
- Intensity measured at
-
@4350K
- CRI Rating
-
97
- Extended CRI Rating
-
95
- Color Temperature
-
Bicolor
- Beam Angle
-
115°
70° with optional Lens
40° with optional Lens
- Dimmer
-
OLED Screen
- DMX
-
No
- Modes
-
2 modes (Separate and Mixed)
- Mount
-
Yoke Mount for Tripod with 16mm spigot
1/4" thread on the Dimmer
- Material
-
Aluminum
MORE SPECIFICATIONS
- Extras
-
Powerful SMD LEDs.
More Powerful than common LED2000 LED lights.
Half size and weight than common LED2000 lights.
OLED Screen, Menu, Temperature control.
2 Modes, Boost.
- Power
-
4pin XLR DC input
Power adapter
- Power Consumption
-
27-35V DC input (2x Vlock or Glock batteries).
130Watt (165Watt with Boost enabled).
Protection when opposite polarity DC input is used.
- Country of Origin
-
Europe
Japan
- Warranty
- 2 Years
PHYSICAL
- Total Dimensions (WxHxD)
- 30 x 19 x 37 cm
- Total Weight
- 3.2 kg
- Product Dimensions
- 260x260mmx190mm without yoke mount
- LED Light Body
- 2m cable
- Dimmer with OLED Screen
- Power Supplier 240Watt Class-I
- Acrylic Diffuser
-
Δεν υπάρχουν διαθέσιμα αρχεία.
Δεν υπάρχουν διαθέσιμα βίντεο.
Accessory
Barndoors for Huge LED
Τιμή στο κατάστημα: 59,00€ + ΦΠΑ
Τιμή Web: 56,64€ + ΦΠΑ
- Barndoor for lights
- 4-leaf Barndoor
- Gel Clips
- Suitable for MZ-LED884 LED lights
4τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Safety Wire 70cm
Τιμή στο κατάστημα: 4,82€ + ΦΠΑ
Τιμή Web: 4,63€ + ΦΠΑ
- Safety Wire
- For Lights or Accessories
- 20KG payload
- 70cm length
62τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Adapter
Boom Arm up to 180cm
Τιμή στο κατάστημα: 24,11€ + ΦΠΑ
Τιμή Web: 23,14€ + ΦΠΑ
- Boom Arm
- For Lights or Accessories
- Boom pole up to 180cm length
- 3-section boom arm
32τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Clamp for table
Τιμή στο κατάστημα: 16,87€ + ΦΠΑ
Τιμή Web: 16,19€ + ΦΠΑ
- Metal Clamp
- For Lights or Accessories
- Mount your light on Tables or poles
- Metal Construction - No plastic parts
26τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Clamp for Umbrella
Τιμή στο κατάστημα: 44,60€ + ΦΠΑ
Τιμή Web: 42,81€ + ΦΠΑ
- Adapter with clamp
- For Light Umbrellas
- For LED/Quartz Lights
- Mount your Umbrella on tripods
13τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Clip for Umbrella
Τιμή στο κατάστημα: 21,70€ + ΦΠΑ
Τιμή Web: 20,83€ + ΦΠΑ
- Metal Umbrella Clip
- For Diffusion or Reflector Umbrellas
- Ideal for MZ-LED176 & MZ-LED336
- Mount your light on Poles or tripods
11τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Dual Glock to 4pin XLR 29.6V
Τιμή στο κατάστημα: 54,38€ + ΦΠΑ
Τιμή Web: 52,19€ + ΦΠΑ
- Battery Adapter
- 2x G-Lock Plates in row
- 29.6V DC output
- For MZ-LED884
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 25 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 25 Εργάσιμες Ημέρες
For Umbrellas w angle adjustment
Τιμή στο κατάστημα: 36,16€ + ΦΠΑ
Τιμή Web: 34,71€ + ΦΠΑ
- Metal Umbrella adapter
- For Diffusion or Reflector Umbrellas
- Ideal for MZ-LED176 & MZ-LED336
- Mount your umbrella on tripods
9τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Magic-Arm-QR-Plate-143RC
Τιμή στο κατάστημα: 162,50€ + ΦΠΑ
Τιμή Web: 156,00€ + ΦΠΑ
- Magic Arm for lights
- 1/4" Screw
- Quick Release
- Spigot 16mm
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 15 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 15 Εργάσιμες Ημέρες
Roof Stand w spigot
Τιμή στο κατάστημα: 19,29€ + ΦΠΑ
Τιμή Web: 18,51€ + ΦΠΑ
- Roof Stand
- For Lights or Accessories
- Mount your light on the roof
- Boom pole up to 55cm length
9τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Spigot w 1/4 and 3/8 screws
Τιμή στο κατάστημα: 2,41€ + ΦΠΑ
Τιμή Web: 2,31€ + ΦΠΑ
- Metal Light tripod adapter
- 16mm Spigot
- 1/4" and 3/8" screws
- Compatible with MZ Tripods
6τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Universal Super Clamp
Τιμή στο κατάστημα: 21,70€ + ΦΠΑ
Τιμή Web: 20,83€ + ΦΠΑ
- Clamp
- For Lights or Accessories
- Mount your light on poles
- Metal Construction - No plastic parts
14τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V-Lock Dual plates to 29.6V XLR
Τιμή στο κατάστημα: 56,07€ + ΦΠΑ
Τιμή Web: 53,82€ + ΦΠΑ
- Battery Adapter
- 2x V-Lock Plates in row
- 29.6V DC output
- For MZ-LED884
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 25 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 25 Εργάσιμες Ημέρες
Battery
Titon-90-V-Mount
Τιμή στο κατάστημα: 335,33€ + ΦΠΑ
Τιμή Web: 321,91€ + ΦΠΑ
- V-Lock Battery
- Tiny Size!
- For Sony Video Cameras
- 14.4V
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 15 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 15 Εργάσιμες Ημέρες
V190 V-Lock w USB 190Wh
Τιμή στο κατάστημα: 169,21€ + ΦΠΑ
Τιμή Web: 162,44€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB
- 14.8V, 13200mAh, 190Wh
- Max Current: 14.3A
21τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V200 Mini V-Lock w USB 207Wh
Τιμή στο κατάστημα: 190,07€ + ΦΠΑ
Τιμή Web: 182,47€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB
- 14.8V, 14000mAh, 207W
- Zero Memory Effect.
10τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V230 V-Lock w USB 230Wh
Τιμή στο κατάστημα: 229,48€ + ΦΠΑ
Τιμή Web: 220,30€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB
- 14.8V, 15600mAh, 230Wh
- Max Current: 14.3A
6τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V300 V-Lock w USB 300Wh
Τιμή στο κατάστημα: 316,17€ + ΦΠΑ
Τιμή Web: 303,52€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB
- 14.8V, 21000mAh, 310Wh
- Max Current: 14.3A
12τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V95 Mini V-Lock w USB 95Wh
Τιμή στο κατάστημα: 113,58€ + ΦΠΑ
Τιμή Web: 109,04€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB
- 14.8V, 6400mAh, 95Wh
- Zero Memory Effect.
11τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V95 V-Lock w USB 95Wh
Τιμή στο κατάστημα: 99,67€ + ΦΠΑ
Τιμή Web: 95,69€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB
- 14.8V, 6600mAh, 95Wh
- Max Current: 14.3A
23τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
V98 Mini V-Lock w USB 98Wh
Τιμή στο κατάστημα: 203,91€ + ΦΠΑ
Τιμή Web: 195,75€ + ΦΠΑ
- High Quality Li-ion Mini Battery
- V-Lock type battery with USB, USB-C
- 14.8V, 6620mAh, 98Wh
- Max Current: 10A
7τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Cable
DC for LED
Τιμή στο κατάστημα: 1,00€ + ΦΠΑ
Τιμή Web: 0,96€ + ΦΠΑ
- Power Cable per meter
- For MZ-LED336, MZ-LED176
- 4 internal cables
- Silicone
19τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Case
Hard-Light04
Τιμή στο κατάστημα: 408,77€ + ΦΠΑ
Τιμή Web: 392,41€ + ΦΠΑ
Flight case for lights - Full protection
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 7 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 7 Εργάσιμες Ημέρες
Pouch 50x60cm
Τιμή στο κατάστημα: 11,38€ + ΦΠΑ
Τιμή Web: 10,92€ + ΦΠΑ
- Protective Pouch
- With 1cm Protective Foam
- Dimensions: 50x60cm
- Dustproof/Scratchproof
178τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Soft Big for LED or Quartz
Τιμή στο κατάστημα: 67,70€ + ΦΠΑ
Τιμή Web: 64,99€ + ΦΠΑ
- Handheld/Shoulder Bag
- Up to 4x Big Lights & 4x tripods
- Up to 3x Small Lights & 3x tripods
- Interior(WxHxD):830x450x330mm
128τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Connector
XLR 4pin Male
Τιμή στο κατάστημα: 2,00€ + ΦΠΑ
Τιμή Web: 1,91€ + ΦΠΑ
- 4pin XLR Male Connector
- For MZ-LED336, MZ-LED176
- Aluminum-Plastic
- 4 pins
122τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Filter
Brown 240mm with magnets
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- Brown Filter
- For MZ-LED884 lights
- Changes Color Temperature
- 240mm Diameter
20τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Cold-201 1/1 Full
Τιμή στο κατάστημα: 16,45€ + ΦΠΑ
Τιμή Web: 15,79€ + ΦΠΑ
- Cold Gelatin Filter
- 5600 to 3200K Rosco
- Full CT Blue 201
- 1.2m x 76cm
6τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Cool 240mm with magnets
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- Cool Filter
- For MZ-LED884 lights
- Changes Warm to Cool Light
- 240mm Diameter
50τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Dark Green 240mm with magnets
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- Dark Green Filter
- For MZ-LED884 lights
- Changes Color Temperature
- 240mm Diameter
20τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Diff-216 1/1 Full
Τιμή στο κατάστημα: 12,26€ + ΦΠΑ
Τιμή Web: 11,76€ + ΦΠΑ
- Difussion Filter
- White Difussion
- Full - Rosco 216
- 1.2m x 76cm
3τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Diffuser 240mm
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- Diffuser Filter
- For MZ-LED884
- 240mm Diameter
- Polycarbonated
91τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Flag 45x60cm w Black Fabric
Τιμή στο κατάστημα: 26,52€ + ΦΠΑ
Τιμή Web: 25,46€ + ΦΠΑ
- Black Flag for Lights
- 45 x 60cm dimension
- Controls or Cuts the light
- Can stop light Completely
27τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Flag 45x60cm w White Fabric
Τιμή στο κατάστημα: 26,52€ + ΦΠΑ
Τιμή Web: 25,46€ + ΦΠΑ
- White Flag for Lights
- 45 x 60cm dimension
- Softens the Light
- Softens the skin tone
30τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Flag 60x75cm w Black Fabric
Τιμή στο κατάστημα: 31,34€ + ΦΠΑ
Τιμή Web: 30,08€ + ΦΠΑ
- Black Flag for Lights
- 60 x 75cm dimension
- Controls or Cuts the light
- Can stop light Completely
30τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Flag 60x75cm w White Fabric
Τιμή στο κατάστημα: 31,34€ + ΦΠΑ
Τιμή Web: 30,08€ + ΦΠΑ
- White Flag for Lights
- 60 x 75cm dimension
- Softens the Light
- Softens the skin tone
35τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Flag 75x90cm w Black Fabric
Τιμή στο κατάστημα: 33,75€ + ΦΠΑ
Τιμή Web: 32,39€ + ΦΠΑ
- Black Flag for Lights
- 75 x 90cm dimension
- Controls or Cuts the light
- Can stop light Completely
29τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Flag 75x90cm w White Fabric
Τιμή στο κατάστημα: 33,75€ + ΦΠΑ
Τιμή Web: 32,39€ + ΦΠΑ
- White Flag for Lights
- 75 x 90cm dimension
- Softens the Light
- Softens the skin tone
22τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Red 240mm with magnets
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- Red Filter
- For MZ-LED884 lights
- Changes Color Temperature
- 240mm Diameter
20τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Softbox 90x90cm w Grids 240mm
Τιμή στο κατάστημα: 113,30€ + ΦΠΑ
Τιμή Web: 108,77€ + ΦΠΑ
- Softbox 90x90cm with Grids for Lights
- High Heat resistance
- For MZ LED Lights LED884
- Turnable metal adapter with screws
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 3 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 3 Εργάσιμες Ημέρες
Warm 240mm with magnets
Τιμή στο κατάστημα: 39,62€ + ΦΠΑ
Τιμή Web: 38,03€ + ΦΠΑ
- Warm Filter
- For MZ-LED884 lights
- Changes Cool to Warm Light
- 240 mm Diameter
Μη διαθέσιμο
Κατόπιν Παραγγελίας : 25 Εργάσιμες Ημέρες
Κατόπιν Παραγγελίας : 25 Εργάσιμες Ημέρες
Warm-204 1/1 Full
Τιμή στο κατάστημα: 16,45€ + ΦΠΑ
Τιμή Web: 15,79€ + ΦΠΑ
- Warm Gelatin Filter
- 5600 to 3200K Rosco
- Full CT Orange 204
- 1.2m x 76cm
2τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
White 240mm with magnets
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- White Filter
- For MZ-LED884 lights
- Full Diffusion
- 240mm Diameter
20τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Yellow 240mm with magnets
Τιμή στο κατάστημα: 10,96€ + ΦΠΑ
Τιμή Web: 10,52€ + ΦΠΑ
- Yellow Filter
- For MZ-LED884 lights
- Changes Color Temperature
- 240mm Diameter
100τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Spare Part
Boost button for LED
Τιμή στο κατάστημα: 2,55€ + ΦΠΑ
Τιμή Web: 2,44€ + ΦΠΑ
- Boost Switch
- For MZ-LED336, MZ-LED176
- Plastic
- Round Switch
719τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
LED PC-Board for 336B
Τιμή στο κατάστημα: 174,00€ + ΦΠΑ
Τιμή Web: 167,04€ + ΦΠΑ
- Led PC Board 336B
- For MZ-LED336B
- 336pcs SMD LEDs
- Warm & Cool Lighting
512τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Mode button for LED
Τιμή στο κατάστημα: 2,55€ + ΦΠΑ
Τιμή Web: 2,44€ + ΦΠΑ
- Mode Switch
- For MZ-LED336B, MZ-LED176B
- Plastic
- Rectangular Switch
830τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
ON-OFF button for LED
Τιμή στο κατάστημα: 2,55€ + ΦΠΑ
Τιμή Web: 2,44€ + ΦΠΑ
- ON/OFF Switch
- For MZ-LED336, MZ-LED176
- Plastic
- Round Switch
718τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Screw 20mm for LED
Τιμή στο κατάστημα: 0,60€ + ΦΠΑ
Τιμή Web: 0,57€ + ΦΠΑ
- Screw 20mm
- For 300/650/800/1000Watt lights
- For Light Body
- Black Color
94τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Spigot Socket 16mm
Τιμή στο κατάστημα: 10,75€ + ΦΠΑ
Τιμή Web: 10,32€ + ΦΠΑ
- 16mm Mount
- 3/8" Attachment Screw
- Aluminum Construction
- Easy Adjustment
5τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Yoke Mount for Quartz 800w
Τιμή στο κατάστημα: 2,10€ + ΦΠΑ
Τιμή Web: 2,01€ + ΦΠΑ
- Yoke Mount
- For 800/1000Watt lights
- Metal Base
- Black Color
271τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Supplier
240Watt 30V/8A
Τιμή στο κατάστημα: 73,96€ + ΦΠΑ
Τιμή Web: 71,01€ + ΦΠΑ
- Power Supplier Class-I
- For LED lights
- For MZ-LED884C/W/B lights
- 240Watt
80τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Tripod
2.4A up to 2.4m - 4KG Payload
Τιμή στο κατάστημα: 38,57€ + ΦΠΑ
Τιμή Web: 37,02€ + ΦΠΑ
- High quality light tripod
- 4KG Payload
- 84cm - 2.4m height
- Air Cushion
52τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
2.8A up to 2.8m - 4KG Payload
Τιμή στο κατάστημα: 40,98€ + ΦΠΑ
Τιμή Web: 39,34€ + ΦΠΑ
- High quality light tripod
- 4KG Payload
- 96cm - 2.8m height
- Air Cushion
53τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
3.0LA up to 3m - 6KG Payload
Τιμή στο κατάστημα: 57,86€ + ΦΠΑ
Τιμή Web: 55,54€ + ΦΠΑ
- High quality light tripod
- 6KG Payload
- 1.22m - 3.0m height
- 3 Sections
29τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
3.8LA up to 3.8m - Payload 8KG
Τιμή στο κατάστημα: 74,73€ + ΦΠΑ
Τιμή Web: 71,74€ + ΦΠΑ
- High quality light tripod
- 8KG Payload
- 1.26m - 3.8m height
- Air Cushion
48τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
C-Stand w Arm - 20KG Payload
Τιμή στο κατάστημα: 175,98€ + ΦΠΑ
Τιμή Web: 168,93€ + ΦΠΑ
- High quality light C-Stand
- 20KG Payload
- 1.45m - 3.28m height
- 16mm Spigot
18τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Heavy Duty Stand 126BSUAC
Τιμή στο κατάστημα: 221,37€ + ΦΠΑ
Τιμή Web: 212,51€ + ΦΠΑ
- Flexible Arm
- For Professional? Lights
- 1/4" Screw & 3/8" Thread
- 16mm Mount
1τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή
Heavy-Duty Stand 126BSU
Τιμή στο κατάστημα: 226,80€ + ΦΠΑ
Τιμή Web: 217,72€ + ΦΠΑ
- Green Chromakey Curtain
- 3x7m?
- Used for keying out subjects
- High quality fabric
1τμχ σε απόθεμα
Άμεση Αποστολή
Άμεση Αποστολή